EOT CRANES MANUFACTURER
AONE EOT CRANES :
Overhead cranes in mining are heavy-duty lifting systems used to move large equipment, ore, and materials within mining facilities. Common types include bridge, gantry, and jib cranes, which operate in processing plants, workshops, and underground shafts. These cranes are designed for rugged conditions, offering precise control, high load capacity, and safety features for efficient and safe material handling.
The under-slung arrangement allows the bridge of this type of crane to be designed with a cantilever at one or both ends.
Key Features & Benefits
Single Girder EOT Crane
Aone Crane brand Electrically Operated Overhead Travelling Cranes are designed & manufactured in accordance with IS: 3177 and IS: 4137. The structural parts of the cranes are designed in as per with IS: 807 and IS: 800. Our cranes are manufactured with standard components and controls to ensure reliability. The single girder design, in general preferred up to 15T capacity and span of 20M, is made from either rolled steel I-beam with C-Channel capping section on top for lateral stiffness or box section fabricated from plate. The rolled steel section girders, even though widely used, are ultimately limited by the availability of beam size and length. The distance from the hook at the top most position to the top of the gantry is often greater than in double girder designs, although low headroom hoists can minimize this limitation.
Standard Features :
| Single Girder EOT Crane Specifications | Name | HOT CRANES |
|---|---|
| Name | Single Girder Type |
| Safe Working Load | 500 kgs to 50,000 kgs |
| Span | 30 mtrs |
| Height of Lift | As per customer specifications |
| Class of Duty / Standards | M5 to M8 as per IS 3177 / IS 807 |
| Speeds | As per clients’ specification / application |
| Crane Control | From floor through Pendant Push Buttons, optionally through Radio Remote Control / cabin with master control |
| Drive System | Twin Drive through Squirrel Cage Induction Geared Motors with built-in fail safe brakes |
| Motors | Squirrel Cage Induction Crane duty motors, IP 55 enclosure, S4 duty, 40% CDF |
| Brakes | ACEM / DCEM disc type brakes, optionally Shoe type brakes for hoist & LT motion |
| Power Supply System | To Hoist and Cross Travel through C-Rail Cable system / Cable Drag Chain. To Crane through Shrouded Bus Bars / Trailing Cable / MS Angle Iron Conductors / Bare Copper Conductors depending on customer's choice and application. |
Double Girder EOT Crane
Aone Crane make electrically overhead traveling cranes are designed & manufactured in accordance with IS: 3177 and IS :4137. The structural parts of the cranes are designed in as per with IS: 807 and IS: 800. Our cranes are manufactured with standard components and controls to ensure reliability. Double girder crane designs can use the same rolled steel sections within the limits imposed by available sizes. For higher capacities and longer spans, box girders are the usual choice. The hoist is part of a crab which usually runs on rails on the top of the bridge beams so that, when lifted up to its maximum height, the hook is between the beams, keeping the headroom required to a minimum.
Standard Features :
| Double Girder EOT Crane Specifications | |
|---|---|
| Name | Double Girder Type |
| Safe Working Load | 500 kgs to 50,000 kgs |
| Span | 30 mtrs |
| Height of Lift | As per customer specifications |
| Class of Duty / Standards | M5 to M8 as per IS 3177 / IS 807 |
| Speeds | As per clients’ specification / application |
| Crane Control | From floor through Pendant Push Buttons, optionally through Radio Remote Control / cabin with master control |
| Drive System | Twin Drive through Squirrel Cage Induction Geared Motors with built-in fail safe brakes |
| Motors | Squirrel Cage Induction Crane duty motors, IP 55 enclosure, S4 duty, 40% CDF |
| Brakes | ACEM / DCEM disc type brakes, optionally Shoe type brakes for hoist & LT motion |
| Power Supply System | To Hoist and Cross Travel through C-Rail Cable system / Cable Drag Chain. To Crane through Shrouded Bus Bars / Trailing Cable / MS Angle Iron Conductors / Bare Copper Conductors depending on customer's choice and application. |